RTM1052

Compact, precise, versatile
Due to their excellent measurement properties and wide variety of practical functions, the R&S®RTM1052 oscilloscopes facilitate daily work, whether in product development or service. Their compact dimensions, simple operation and brilliant display make them the first choice for everyday test and measurement tasks.

• Finding signal faults quickly and effectively
• Tools for fast signal analysis
• Smart operating concept
• Reliable results for stringent demands
• Triggering and decoding of serial protocols

Benefits
Finding signal faults quickly and effectively
• Extensive triggering options for keeping track of important signal events
• Highlighting of rare events simplifies debugging
• Optimal overview: X-Y(-Z) mode
• Versatile selection of signal acquisition modes
• "Smooth" mode for smoothing non-periodic signals

Tools for fast signal analysis
• Detailed analysis made easy: with zoom function and event marker
• QuickMeas - key results at the push of a button
• Extensive cursor-based measurement functions
• FFT - signal analysis in the frequency domain
• Mask tests for revealing signal deviations

Smart operating concept
• Color-coded controls for clear overview
• Flat menu structures and dedicated buttons for getting work done quickly
• High-resolution XGA display - perfect for even the finest details
• Connectivity
• Portable due to compact design
    
Reliable results for stringent demands
• High time resolution - even for long signal sequences
• Excellent measurement accuracy due to low-noise frontends
• Full measurement bandwidth, even at 1 mV/div
• No crosstalk thanks to good channel-to-channel isolation
• Precise measurement of steep edges using passive probes

Specifications
Vertical system

Input channels	2
Bandwidth (-3 dB) at 50 Ω	500 MHz
Rise time (calculated):	700 ps
Input impedance:	50 Ω ±1.5 %  1 MΩ ±1 % with 13 pF±1pF
Input sensitivity: (max. bandwidth in all ranges)	50 Ω: 1 mV/div to 1 V/div 1MΩ: 1 mV/div to 10 V/div
Resolution:	8 bit

Acquisition system

Max. realtime sampling rate:	5 Gsample/s; 5 Gsample/s interleaved
Memory depth:	4 Msample; 8 Msample interleaved
Decimation modes: (combination of decimation mode and waveform arithmetics possible)	sample, peak detect, high resolution
Waveform arithmetics:	off, envelope, average, smooth, filter
Interpolation:	sin(x)/x

Horizontal system

Time base range:	1 ns/div to 50 s/div
Time base accuracy:	10 ppm
Channel deskew:	±100 ns

Trigger system

Trigger types:	edge, width, video, pattern, B-trigger
Trigger level:	± 10 div from center of screen

Analysis and measurement functions

QuickMeas: (at the push of a button, measurement values available internally are written directly onto the waveform and d continuously)	peak-to-peak voltage, pos. peak, neg. peak, rise time, fall time, mean value, RMS value, period, frequency
Automatic measurements:	mean value, RMS value, mean cycle, RMS cycle, std. deviation wave, std. deviation cycle, amplitude, top level, base level, pos. overshoot, neg. overshoot, peak-to-peak voltage, pos. peak, neg. peak, period, frequency, delay, phase, burst width, number of pulses, number of neg. pulses, number of rising edges, number of falling edges, pulse width, inverted pulse width, duty cycle, neg. duty cycle, rise time, fall time, trigger period, trigger frequency
Cursor measurements:	voltage, time, voltage & time, ratio X, ratio Y, number of pulses, peak value, RMS value, mean value, duty ratio, burst width, rise time, fall time, vertical marker
Waveforms maths:	addition, subtraction, multiplication, division, maximum, minimum, square, square root, magnitude, positive wave, negative wave, reciprocal, inverse, integral, differentiation, log10, ln, lowpass filter, highpass filter, FFT

General data

Dimensions (W x H x D):	403 mm x 189 mm x 142 mm (15.87 in x 7.44 in x 5.59 in)
Weight:	4.9 kg (10.8 lb)
Display:	8.4" XGA TFT color display, (1024 x 768 pixels)
Connectivity:	2 x USB host, USB device, LAN, GPIB (optional), DVI-D for external monitor